Asenware Battery standalone smoke detector AW-SSD606D

A bi-color LED on each detector provides a local 360° visible alarm indication. They flash once every minute to indicate that power is on and the detector is working properly. The red LED flashes when the alarm occurs. When there is a fault condition indicating that the detector sensitivity is outside the listed limits or the battery is low, the yellow LED will flash. The alarm can be reset by pressing the button or when the fire alarm is not collected for a long time.

Product Features 

1. Smoke Detection: The primary function of the AW-SSD606D is to detect the presence of smoke in its vicinity. When smoke particles are detected, the device triggers an alarm to alert occupants of a potential fire or smoke-related hazard.
2. Stand-Alone Operation: This smoke detector is designed to operate independently and does not require a central fire alarm panel or a complex wiring network. It is a self-contained unit that can be installed in various locations without the need for extensive integration.
3. Photoelectric Sensing Technology: The AW-SSD606D typically uses photoelectric smoke sensing technology. This technology relies on the scattering of light to detect smoke particles. When smoke enters the detection chamber, it scatters the light, triggering the alarm.
4. Loud Audible Alarm: In the event of a smoke detection, the detector typically emits a loud audible alarm (often a siren or horn) to alert people in the vicinity to evacuate the area immediately.
5. Visual Indication: Many smoke detectors, including the AW-SSD606D, feature visual indicators (usually LED lights) to provide a visual signal when smoke is detected or when the device is in a low-battery state.
6. Battery-Powered: Standalone smoke detectors are typically powered by replaceable batteries, such as 9-volt alkaline batteries. Some models may have long battery life or low-battery alerts to ensure reliable operation.
7. Test Button: These detectors often come with a test button that allows users to manually check the functionality of the device and verify that it is operational.
8. Easy Installation: Installation is usually straightforward and can be done by mounting the detector on a ceiling or wall using the provided hardware. No complex wiring is required.
9. Suitable for Various Environments: The AW-SSD606D can be installed in a range of indoor environments, including bedrooms, living rooms, hallways, kitchens, offices, and storage areas.
10. Compliance: The product may comply with relevant safety standards and certifications, depending on the region and manufacturer.
11. Interconnection: Some standalone smoke detectors can be interconnected wirelessly, allowing them to communicate with each other. When one detector triggers an alarm, it can activate all interconnected detectors in the network.

Product Specifications