Solar Charge Controller 12V/24V 30A PWM
Solar charge controllers can automatically control the operation of the solar panel and battery in the solar system. It is easy to set up and operate. To protect the life of your battery, when the voltage of the battery drops below 8V, the solar controller automatically turns off (LCD is not available at the same time). It is a very smart unit for solar panels!
This charge controller is for 12V / 24V. When installing for the first time, ensure that the battery has sufficient voltage so that the charge controller can detect the normal battery type. Install the charge controller as close as possible to the battery to avoid voltage drops due to excessively long cables.
The solar charge controller should first connect the battery and then connect the solar panel and finally the load! The order of disassembly does not correspond to the order of cabling.
Product Specifications
- Colour: Blue + Black
- Max. Charge/ Discharge Current: 30A
- System Voltage: 12V / 24V
- Max. Input Voltage of Solar Panel: 55V
- Self-consumption: ?12mA
- LVD: 11.0V ADJ 9V…12V
- LVR: 12.6V ADJ 11V…13.5V
- Boost Charging: 14.4V, Battery voltage less than 12V start boost charging 2 hours
- Battery Over Voltage Protection: 16.5V
- Reverse Connection Protection: Yes
- Load Over Current Protection: Yes
- Charge Type: PWM
- UBS Output: 5V 1.0A
- Temperature Compensation: -24 mV/ ?C for 12V system
- Working Temperature: -20?C ~ +55?C
- Terminal Scale: 14-6 AWG
- Waterproof: IP32
- Size: 192mm x 109mm x 44mm
Reviews
There are no reviews yet.